OpenScape Business V2 Upgrade HiPath 3300/3500 V9 on OSBiz X3R / X5R incl. motherboard and system software L30251-U600-G650

OpenScape Business V2 Upgrade HiPath 3300/3500 V9 on OSBiz X3R / X5R incl. motherboard and system software

DUG650 + contains only the motherboard - license must be purchased separately +
OSBIZ V2 UPGRADE BOARD HiPath 3300/3500 V9 ​​ON X3R / X5R

The license upgrade position and possibly further licenses must be ordered separately
When migrating HiPath 3000 V5 / V6 / V7 / V8 / V9 systems OpenScape Business V2 is to examine the compatibility of all existing hardware components.
System Cabinet can still be used.
Expand motherboard and HG1500 and are against the OSBiz Mainboard swap.
OpenScape Business X3 / X5 require a power supply UPSC-D. If necessary, 35xx is the built-in older HiPath 33xx / PSU against UPSC-D (x 3W, X5W) or UPSC-DR (X3R, X5R) to swap.
Peripheral modules and optional modules are HW Compatibility List to check in accordance with, if necessary, replace or remove.
Optiset E terminals are not capable of running at OSBiz. DSP channels for systems with IP / TDM -Übergängen (eg TDM office / IP User): DSP channels for up to 8 simultaneous IP / TDM transitions are pre-performed on the OSBiz motherboard. In order to increase to up to 48 simultaneous DSP channels the option module OCCB1 is required. For up to 128 simultaneous channels is the OCCB3 available.
Note: The license migration takes place exclusively on the basis of a running HiPath 3000 V9 ​​system. Here a possible presence V9 license file is taken into account. If a HiPath 3000 upgraded to a OpenScape business, the MAC address of the HiPath 3000 will be entered in a blocking list and motherboards can not be licensed for another HiPath 3000 system.